Current Location： Products > Signal Generator > Function Signal Generator
<%
function dealchl(content,dsize,sign)
if len(content)>dsize then
dealchl=left(content,dsize)&sign
else
dealchl=content
end if
end function
%>
<%
rssql="select * from lei_product_class where paterid=0 order by ordertime desc"
set rs=server.CreateObject("adodb.recordset")
rs.open rssql,conn,1,1
%>
<%
if not rs.eof and not rs.bof then
do while not rs.eof
%>
1.Have functions of digital frequency meter
2.Built-in linear and logarithmic frequency sweep functions
3.External frequency modulation function and VCF voltage control input
4.50Hz sine wave output
5.TTL/CMOS output
6.Sine wave, square wave, triangular wave, oblique wave and impulse wave
7.Two groups of LED respectively digitally display output voltage and frequency value
8.Full-metal casing shell has excellent electromagnetic compatibility, thus appearance is much firmer
Main Technical Indexes:
Product Name
Function Signal Generator
Dimension and Weight
Power Supply
Main Technical Indexes
1. Voltage output: frequency: 0.1Hz~1MHz/0.3Hz~3MHz
· Output waveform: Sine wave, square wave, triangular wave, oblique wave and impulse wave
· Output signal type: single frequency, frequency modulation, amplitude modulation and frequency sweep
· Frequency sweep type: linear and logarithmic
· Frequency sweep speed: 5s~10ms
· Output voltage range: 20Vp-p(1MΩ), 10Vp-p(50Ω)
· Output voltage protection: short circuit, output voltage resistance is ±35V (one minute)
· Distortion degree of sine wave: ≤100K 2% ＞100K 30dB
· Frequency response: ±0.5dB
· Triangular wave linearity: ≤100kHz:98% ＞100kHz:95%
· Duty ratio adjustment: 20%~80%
· DC bias: ±10V (1MΩ), ±5V(50Ω)
· Rise time of square wave: ≤100ns 5Vp-p 1MHz
· Damping precision: ≤±3%
· Duty ratio vs frequency: ±10%
· 50Hz sine wave output: about 2Vp-p
2. TTL/CMOS Output, output amplitude: “0”: ≤0.6V
· “1”: ≥2.8V
· Output impedance: 600Ω
· Output short circuit protection: short circuit, input voltage resistance is ±35V (one minute)
3. Frequency counting: measurement precision: five digits, ±1%, ±1 word
· Distinguishability: 0.1Hz
· Gate time: 10s, 1, 0.1s
· Outside frequency measurement range: 1Hz~10MHz
· Outside frequency measurement sensitivity: 100mV
· Counting rage: five digits
<%else%>
<%end if%>
