当前位置:首 页 > 产品中心 > 示波器 > 双时基示波器  
 
用户:
@
密码:
 
 
<% function dealchl(content,dsize,sign) if len(content)>dsize then dealchl=left(content,dsize)&sign else dealchl=content end if end function %> <% rssql="select * from lei_product_class where paterid=0 order by ordertime desc" set rs=server.CreateObject("adodb.recordset") rs.open rssql,conn,1,1 %> <% if not rs.eof and not rs.bof then do while not rs.eof %> "> <% rs.movenext if rs.eof then exit do loop else Response.Write("") Response.Write("") Response.Write("") end if rs.close set rs = nothing %>
onClick="showorhidden(M1<%=rs("ID")%>);" <%end if%>> <%if rs("child")=1 then%> <%else%> <%end if%> "> <%=dealchl2(rs("Name"),15,"...")%>
<%call ShowTree2(rs("id"),"lei_product_class","name",14,"../cp.asp")%>
") Response.Write("No records!") Response.Write("

数字存储示波器   CRT数字读出示波器     双时基示波器     二踪通用示波器   小型通用示波器

YB4368
主要特点:
1.宽频带:DC-100MHz -3dB
2.最高垂直偏转系数为1mV/div,最快扫描偏转系数为5ns/div
3.A、B双时基扫描可同时显示
4.释抑功能使各种复杂信号同步更加稳定
5.采用高可靠性、高稳定性SMT工艺,设计新颖美观,性价比高


主要技术指标:


产品名称
 双时基示波器
尺寸重量
 150×310×440(高×宽×深)7.5kg
用电电源
  198V~242V










1.带宽:DC~100MHz(-3db)
2.CH1、CH2灵敏度:5mV~5V/DIV 1-2-5进制分10档(1mV/div~1V/div 在×5MAG)
3.垂直灵敏度微调:小于指示灵敏度的1/2.5倍
4.上升时间:约3.5ns,约35ns 在×5MAG,约17.5ns 在20MHz带宽
5.最大输入电压:400V(DC+AC峰值),1kHz
6.扫描模式:A,B,B TRIG’D,X-Y,ALT
7.扫描扩展:×10MAG:±5%(0.1,0.05μs/div不校正)
8.工作模式:在X-Y模式运行时CH1,X轴而CH2,Y轴
9.触发模式:AUTO、NORM、TV-V、TV-H
10.触发信号源:INT、CH2、LIN、EXT
11.波形:正向方波
12.幅度:0.5Vp-p±2%
13.频率:1KHz±10


 
 

如有任何问题,请发邮件ytek@yangtek.com 本站域名:www.yangtek.com   管理登陆
扬中市扬泰电子仪器有限公司   版权所有  未经授权禁止转载、摘录、建立镜像.如有违反追究法律责任